Nistune Cannot find USB correct Drivers. ERROR

[Matt]

That is strange. If you have another log of that with the updated tune, can you post here?

Going from the prior log we can see that injection time is switching between sequential/batch at the point you might see the issues. I looked into the batch parameters setup between NA and the slightly larger turbo injectors

Code: Select all

A2A1 : D6 54 		ldab	X0054
A2A3 : 81 06 		cmpa	#$06
A2A5 : 22 1E 		bhi	LA2C5
A2A7 : 25 04 		bcs	LA2AD
A2A9 : C1 97 		cmpb	#$97
A2AB : 24 18 		bcc	LA2C5

This is for the batch enable parameter, so same for NA/turbo it seems looking at 25P00. Everything else looks okay but i didn't copy the feedback switches in. Updated with the feedback switches from the 25P00 image. See how that goes and please post a log of this

Easy solution is to put in the turbo injectors now, and then we just keep the NA fuel and timing maps

[tht_z31]

I’ll definitely try that out, I’m planning to na2t soon so I might grab the turbo injectors now. I appreciate you helping me out man

[tht_z31]

Yep, that seemed to fix the problem, thank you.

[Matt]

Excellent!