MPX4250 pressure sensor alternatives

Any wideband device that doesnt have its own category yet.

Moderator: Matt

Post Reply
turbovan
 

Posts: 5
Joined: Sat Aug 11, 2007 1:11 pm

MPX4250 pressure sensor alternatives

Post by turbovan »

Looks like the MPX4250 series are obsolete and no longer available from digikey or arrow.

Does anyone know of an alternative?

Thanks
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: MPX4250 pressure sensor alternatives

Post by Matt »

Might have to try other places after google searching
https://www.diyautotune.com/product/mpx ... ap-sensor/
turbovan
 

Posts: 5
Joined: Sat Aug 11, 2007 1:11 pm

Re: MPX4250 pressure sensor alternatives

Post by turbovan »

Works out to $190 AUD with shipping.

Was thinking of using this one instead:

https://www.efisolutions.com.au/bosch-m ... ernal-type
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: MPX4250 pressure sensor alternatives

Post by Matt »

That looks promising and a better price. As long as you can get the MAP > volts conversion for it then you should be set
turbovan
 

Posts: 5
Joined: Sat Aug 11, 2007 1:11 pm

Re: MPX4250 pressure sensor alternatives

Post by turbovan »

Yep, there is a graph shown on the page, linear with 0.4V = 20kPa to 4.65V = 300kPa.
Post Reply