Connected aem via FTDI serial.
Teraterm readings are fine (mirroring gauge)
Nistune is not, saying 20-22 or something like that while the gauge appears to be accurate.
Different readings on nistune vs gauge
Moderator: Matt
Re: Different readings on nistune vs gauge
Also NIStune is now crashing all the time.
I suspect bad chipset but apparently it’s genuine FTDI.
I suspect bad chipset but apparently it’s genuine FTDI.
Re: Different readings on nistune vs gauge
Do you have details of the crashing? Is it blue screen, or is the software locking up/ freezing or does it shutdown?
Which version are you running? 1.4.5?
If you can grab a debug log I can have a look. Nistune should be taking the number reported and displaying the same (there is a lambda option too). If tera term looks fine then the software should too
File > Config > Misc > Debug logging (enabled) and then restart, connect to UEGO only for a bit and then email the .LOG through or post it here
Which version are you running? 1.4.5?
If you can grab a debug log I can have a look. Nistune should be taking the number reported and displaying the same (there is a lambda option too). If tera term looks fine then the software should too
File > Config > Misc > Debug logging (enabled) and then restart, connect to UEGO only for a bit and then email the .LOG through or post it here
Re: Different readings on nistune vs gauge
Thanks Matt I’ll get it over the weekend