crashing when changing constants

Discuss software bugs and related problems here.

Moderator: Matt

Post Reply
r31_gav
 

Posts: 18
Joined: Sat Jan 19, 2008 4:48 pm
Location: penrith, sydney

crashing when changing constants

Post by r31_gav »

just a heads up that for me nistune often crashes and wants to send an error report when i exit the constants and maf change window. whether ive changed the values or not. im not sure whats going on.

regards
Matt
Site Admin
 

Posts: 8967
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

okay thanks. Crash bugs are bad....

Which constants are you changing exactly and to what numbers is causing the crash?

Are you doing this with 'auto' ticked

Are you using the Operations-Constants window?

Which address file are you using also?
r31_gav
 

Posts: 18
Joined: Sat Jan 19, 2008 4:48 pm
Location: penrith, sydney

Post by r31_gav »

using the hr31 eccs rb20det adr file
auto box was ticked for tp scales etc
changing injector sizes box and change the maf window as well
and i wasn't using the operations-constants cause there is only injection multiplier
Matt
Site Admin
 

Posts: 8967
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

so far fixed divide by zero bug in the K constant window (when K constant = 0 can crash). looking for the other ones...
Post Reply