HI again!
the problem is that
when i push 100% throttle on 2-2.5k rpm the car goes in reach about 9.5 afr for about 1-2 sec and the it accelerates to the rew with nice ~ 12.5 i tried to change the fuel map cells but it didn't helped! what could be the problem?
Problem with reach
Moderator: Matt
May be using the 'Acceleration Increase Fuel' table.
This looks at the TPS switch when you floor it and uses its position to determine when to use 'max load' or 255 value for TP
You get the 'raw' value and multiply it by 20 to get milivolts for the TP switch. I've added the translation now to the next version to display it for you
This looks at the TPS switch when you floor it and uses its position to determine when to use 'max load' or 255 value for TP
You get the 'raw' value and multiply it by 20 to get milivolts for the TP switch. I've added the translation now to the next version to display it for you