Problem with reach

Discuss software bugs and related problems here.

Moderator: Matt

Post Reply
RoDeO
 

Posts: 13
Joined: Tue Apr 08, 2008 8:32 am

Problem with reach

Post by RoDeO »

HI again!

the problem is that

when i push 100% throttle on 2-2.5k rpm the car goes in reach about 9.5 afr for about 1-2 sec and the it accelerates to the rew with nice ~ 12.5 i tried to change the fuel map cells but it didn't helped! what could be the problem?
Matt
Site Admin
 

Posts: 8967
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

May be using the 'Acceleration Increase Fuel' table.

This looks at the TPS switch when you floor it and uses its position to determine when to use 'max load' or 255 value for TP

You get the 'raw' value and multiply it by 20 to get milivolts for the TP switch. I've added the translation now to the next version to display it for you
Post Reply