Gear Displays.

kenbam · Post by **kenbam** » Sat Aug 23, 2008 5:34 pm

Matt.

Just wondering if you could look at setting up a gear display for live and replaying data. I have seen it before on a motec. You input tyre rolling radius, ratios for each gear relevant to the gearbox being used and the Diff ratio and the software calculates which gear your in through road speed and RPM and displays it. Your obviously going to know which gear your in showing live but it could be useful during playback of logged data.

Just a thought.

Matt · Post by **Matt** » Tue Aug 26, 2008 10:37 pm

I could add it to the list but it would be pretty low on the priority side of things right now

This weekend I've just been coding up VEMS and JAW wideband support and will be testing out the following week

After that its back to knock detection work