So, I have a brand new spiffy Innovate LM-2. Read the article regarding LM-2
connecting to NIStune. Whew, what a hassle. Any news on connecting LM-2 to NIStune?
Anyways, I have a DLP A/D conv. ,so I hooked the analog out from LM-2 to DLP A/D. Getting a nice 0-5v signal to it from LM-2.
I configure AFR1.csv from the LM-2 analog output 1 data:
AFR
0000,7.35
5000,22.39
Open NIStune ,connect wideband....and get 9.00 in AFR box. Always 9.00. It never changes regardless of what LM-2 reports AFR to be.
Tried AFR on AUX1 and AUX2..they don't register in WBand box.
Used DLP Designs demo program to read the voltage on com port, AFR1,AFR2,AUX1 were reading same voltage as LM-2 analog output.
I'm stumped. please help.
DLP A/D converter connection problem
Moderator: Matt
The latest version (0.9267) i've moved the Innovate DLLs to install into the nistune directory rather than window system directories to avoid the problems experienced in previous version
You need a serial connection cable (instead of USB) for the LM-2 in the meantime and then install logworks and then latest nistune and then it should work using their versions of the DLLs
In regards to the DLP A/D converter, I havent changed anything for a while I can check it out tomorrow. If you can send me a debug log that will help also
You need a serial connection cable (instead of USB) for the LM-2 in the meantime and then install logworks and then latest nistune and then it should work using their versions of the DLLs
In regards to the DLP A/D converter, I havent changed anything for a while I can check it out tomorrow. If you can send me a debug log that will help also
Soon
Getting serial cable and adapting it soon. Will let know the results.
late reply
Just a quick finisher to thread. The LM-2 serial output to NIStune works fine. Had to purchase Innovate's cable and splice it to a serial cable end. works.
