Nistune topics specific to the 6802 cpu
Moderator: Matt
-
Alrick
-
- Posts: 20
- Joined: Wed Mar 12, 2008 6:37 am
- Location: Netherlands
-
Contact:
Post
by Alrick »
i Tried resizing the injectors using the injector resizing tool..
from 370cc to Denso 550cc injectors...
it starts ok
but then the RPM starts to drop and dies..
what else must i do ?
injector latency and K value ?
what do i need to do..
-
kenbam
-
- Posts: 131
- Joined: Sat Sep 15, 2007 9:46 am
Post
by kenbam »
K is changed with the resizing tool, latency isnt. You will have to play with that.
-
Alrick
-
- Posts: 20
- Joined: Wed Mar 12, 2008 6:37 am
- Location: Netherlands
-
Contact:
Post
by Alrick »
Tnx for the reply....
For future references or anybody who needs to know the latency for
DENSO 550cc Top feed injectors
latency = 850
i set mine at 1025 now since it idles better at this setting..