Board : type 2
I previously had a Zemulator which was running perfectly. So before installing my Type 2 board, I downloaded the ECU image using both Nistune and Conzult. Both files (.BIN) were the same, so no integrity problem I presume.
As I know the Zem has its own secure codes (to prevent from copy) inside the image data in the Romulator (I presume the codes are in non-used areas), I asked Matt to preload my board with an OEM image rather than the Zem's image, so that I don't have the secure codes in the future BINs I could generate with Nistune.
I installed the board and started the engine : perfect.
Then I uploaded the Zem's BIN file in the board with Nistune. Matt told me this operation only copies the maps Nistune knows, and he had controlled that the secure codes were not in some maps (I hope he did).
When I started the engine with the Zem's image, I immediately recongnized a problem I already had with corrupted ECU memory : rough idle then the engine stops, electric fan starts, and I can hear an horrible squeak from the accessories belts. Not really limp mode, but something like that.
So I uploaded another BIN coming from an upgraded ECU from Ash (but not from a Zemulator), and the engine started normally.
What happened with this BIN file from the Zemulator ? I didn't check all the maps but the major ones (timing, AFR...) were correct.
BTW, I blew my engine a few minutes after (it was 2 days ago)
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)