would be great if the speed cut was enabled for the AFR graph plotter... like a speed trigger to set the trigger condition.... and Wide open throttle... then start plotting AFR till redline and hold the vaues.. only if wot is reached again at the selected speed it should restart....
the AFR plotter still plots things under DECEL and also at different throttle positions making it kind of useless at the moment..
I love what happened with the decel cut feature already just would be a really hand feature to have so when you road tune you can cruise between throttle position X and Y and get an afr trace
AFR plotter (road dyno)
Moderator: Matt
-
chris2712au
- Posts: 343
- Joined: Thu Jun 19, 2008 1:52 am
- Location: sydney australia
there were some adjustments which were made for the auto tuner (TPS enablement) but are not actually used in the AFR plotter at this stage
I can integrate those fairly easily into the AFR plotter allowing
Min - Max TPS
Min speed trigger
RPM max
Then you can set those up for just plotting the window that you need. I've added it to me work list which I plan to start hitting again over the next week
I can integrate those fairly easily into the AFR plotter allowing
Min - Max TPS
Min speed trigger
RPM max
Then you can set those up for just plotting the window that you need. I've added it to me work list which I plan to start hitting again over the next week