boost solenoid duty cycle on the consult gauges..

chris2712au · Post by **chris2712au** » Thu Feb 19, 2009 7:29 pm

hey mat could you give me a consult gauge to record and display the duty cycle on the boost solenoid please ? or can we do that already ?

Did you find out what blew up on your car ?

Thanks chris..

Matt · Post by **Matt** » Thu Feb 19, 2009 11:40 pm

have to look into it...

vacuum hose near actuator went and caused overboost. it knocked one of the intercooler pipe connectors off (loss of boost) and also put a hole through one of the injector o rings (found this out after changing intake manifold gasket). i was using the GTR rings which came with the injectors and should have use the RB30 ones instead ... found that out the hard way

all good now! so should hopefully start tuning next week depending how busy it gets with this (nistune) stuff

chris2712au · Post by **chris2712au** » Fri Feb 20, 2009 7:22 am

great..

Would be a useful tool so I can look at TP boost pwm and RPM..

at the moment I am just comparing results with the AFR tracer with a map sensor.