AFR input tracer not showing correct afr in newest version

Herb-86T · Post by **Herb-86T** » Wed Feb 18, 2009 11:04 am

Im having problems seeing the correct afrs when fast playing through a log with the afr input tracer open. it just shows 9.0 afr all over the board, meanwhile the log player shows correct data. I ran this log in the previous version of nistune, by deleting the "tp msb" column in the log file and the afr tracer worked normally. however in that version, the log player showed the flat line at the bottom for afr, ive updated all my versions of nistune at this point, with up to date adr files and roms.
running a techedge 2A0 btw, set wideband lookup tables to the 2.0 folder.

screen shot here:
http://picasaweb.google.com/lh/photo/Ta ... directlink

Herb-86T · Post by **Herb-86T** » Wed Feb 18, 2009 11:16 am

if the log isnt playing, and you click on the traces at a particular point, the afr shows. only shows incorrectly when playing or fast playing.

Matt · Post by **Matt** » Mon Feb 23, 2009 12:35 am

most likely the scales for the AFRs are having an issue

i cant see it here... so i need more info

- What engine/ECU?
- Which wideband unit?

Can you post a log here so I can playback on my laptop here with your setup to repeat

Also if you click on 'Expand' from logger window does the AFR scaling show up correctly? Mine show as 0 - 16 AFR - 32AFR correctly and the playback works fine in fast mode

Herb-86T · Post by **Herb-86T** » Mon Feb 23, 2009 3:09 am

vg30et
techedge 2AO

afr shows correctly in the log player, and expanded log player. only wrong in the afr 3d trace.

Herb-86T · Post by **Herb-86T** » Mon Feb 23, 2009 3:24 am

screenshot

Matt · Post by **Matt** » Mon Feb 23, 2009 7:57 am

thanks i can see it with this log now... i'll look into it further

Matt · Post by **Matt** » Sun Mar 08, 2009 3:27 pm

this was fixed in 0.9.3.6.1 release