My latest attempt at a wastegate setup

Bernardd · Post by **Bernardd** » Tue May 16, 2006 1:21 pm

that didn't work out. crap.

Stinky · Post by **Stinky** » Wed May 17, 2006 3:19 am

Nice work. Not the smoothest path back into the exhaust though.

Bernardd · Post by **Bernardd** » Wed May 17, 2006 5:31 am

I was mostly concerned with flow to the wastegate rather than out of. I still have boost creep like hell.

Stinky · Post by **Stinky** » Wed May 17, 2006 7:35 am

where are you getting the boost signal that goes to the wastegate actuator?

Bernardd · Post by **Bernardd** » Thu May 18, 2006 12:07 am

I've tried from the intake and from the turbo outlet on the IC piping. I'm going to port the hell out of it when I get back home and see if that helps.

Bernardd · Post by **Bernardd** » Sat May 20, 2006 2:45 pm

after some discussion with the buddy who sold me the wastegate, i decided to reinstall my water injection, boost controller and see just how high the boost would go. my buddy claimed it would stop by 18psi or so. he was right. i set my boost controller for 18 and it holds. i was going to run that much eventually anyway.

Stinky · Post by **Stinky** » Sat May 20, 2006 3:50 pm

Interesting. 18psi spring in it? It would be nice to run a little less i would think.