Injector Duty Cycle not reading... S13 KA24de-t

Caspers_240 · Post by **Caspers_240** » Mon Apr 06, 2009 4:11 am

I would like to be able to log the duty cycle on my 91' S13 KA24de-t but the reading just stays at 0. Am I missing something?

Injectors are stock 370's out of an SR, so I know I'm limited W/ stock FPR and a T28...

Thanks guys!

Caspers_240 · Post by **Caspers_240** » Tue Apr 07, 2009 2:41 pm

anybody?

Matt · Post by **Matt** » Wed Apr 08, 2009 2:29 am

im seeing it here on log playback (ER34). looking into it

chris2712au · Post by **chris2712au** » Thu Apr 16, 2009 9:40 pm

check that you have the correct flags enabled.. it was the same for my s15 and I had to enable it in the flags for the consult registers as it isnt a default setting

Matt · Post by **Matt** » Thu Apr 16, 2009 11:10 pm

i was looking at that file again and found it was used.

thanks chris... didnt think about the drop down list

let us know if it is okay once you select it in the guages list

Matt · Post by **Matt** » Sat Apr 18, 2009 7:57 pm

Operations - Select Display Guages - Tick 'Injector duty'

I've closed this one out since its just a tickbox thing