Innovate Broadband

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
Christian
 

Posts: 24
Joined: Sun Mar 29, 2009 5:29 am
Location: Austria

Innovate Broadband

Post by Christian »

New user here, so hello from Austria to all at first.

I'm using Nistune with a Type 1 board on an EDM 180SX S13 with CA18DET.

I saw there are quite a few broadband units supported by Nistune and I was wondering if it would be possible to connect a Innovate Motorsports LM-2?

Cheers
Christian
shromy
 

Posts: 19
Joined: Thu Apr 09, 2009 7:55 am
Location: ATl, GA
Contact:

Post by shromy »

Yes it will work.
Matt
Site Admin
 

Posts: 8990
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

LM-2 does work but you need to purchase two serial cables from innnovate and patch them together

see here
viewtopic.php?t=673&start=30

LM-1 and LC-1 are officially supported and work out of the box. I use the LC-1 here
Christian
 

Posts: 24
Joined: Sun Mar 29, 2009 5:29 am
Location: Austria

Post by Christian »

Cool, thanks.

Will look into that


Cheers
Christian
Post Reply