Chaining of many LC1s supported by Nistune !?

RomChip200 · Post by **RomChip200** » Tue May 12, 2009 4:36 pm

Version: 0.9.5.x (same w/ older versions)

I have two LC1s and two XD16 gauges chained all together. Through MTS protocol, Innovate allows you chaining many LC1s (and other devices).
Of course, Logworks detects correctly each LC1 in the chain.
The chain needs one COM port only (connected to the OUT plug of the chain):
stub -- inLC1out -- inLC1out -- inXD16out -- inXD16out -- COMport

In Nistune, I can select Innovate for the first WBO2 and then, for one COM port only.
For the 2nd WBO2, Innovate option is not available.
At the end, I have only one WBO2 taken into account by Nistune as if Nistune didn't detect the chain.

Matt, please clarify this use case is supported or not (should be if you support MTS).

Matt · Post by **Matt** » Tue May 12, 2009 7:55 pm

nistune doesnt support multiple chained items at this time. We use MTS and what it reports to use is reported in the AFR and auxillary inputs

i would need a debug log file of what you are seeing and can determine if MTS is reporting those chained items to us

Innovate documentation does not decribe how to pull chained items through the MTS SDK so I would need to figure that part out