Knock when shifting???

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
Christian
 

Posts: 24
Joined: Sun Mar 29, 2009 5:29 am
Location: Austria

Knock when shifting???

Post by Christian »

Hi

Today I took a longer drive with logging enabled.
I noticed that sometimes the knock counter is increased exactly when the throttle is released after full throttle.
eg.:
04:06
04:22
04:26

I have attached the log.

Is this normal or does anybody else experience this?
Car is a RS13 with CA18DET, stock MECD007D software was used.

Cheers
Christian
Attachments
NIStune_2009-07-25_1402_57.zip
(452.17 KiB) Downloaded 128 times
Matt
Site Admin
 

Posts: 8984
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

could be engine noise? I'm still investigating the knock sensor logging at the moment, but if you have the knock window enabled do you hear it when letting go of the throttle?
Christian
 

Posts: 24
Joined: Sun Mar 29, 2009 5:29 am
Location: Austria

Post by Christian »

I had a drive for several hours today with some very spirited driving - no knock at all in the logs.

I had knock monitor open for some of the time, but there was nothing on it either.

I'll observe this further and post the result.
Post Reply