TP (load) recovery

mqp · Post by **mqp** » Wed Sep 09, 2009 8:44 pm

Hi everybody,

I don't really understand what is theoretical Pulsewidth recovery table. Is this a minimum tp value?

For me, the ttp min table do the same ...

Thanks for precisions.

Matt · Post by **Matt** » Thu Sep 10, 2009 7:04 pm

TP basically equals load

TP cut is when TP > value in cut table will then cut fuel
TP recover is when TP < value in recover table will resume injecting fuel

mqp · Post by **mqp** » Thu Sep 10, 2009 7:22 pm

OK, so the TP recovery table occur only when a fuel cut is effective for resume injection?

Matt · Post by **Matt** » Thu Sep 10, 2009 10:52 pm

correct

mqp · Post by **mqp** » Thu Sep 10, 2009 11:04 pm

OK, thank you