s15 back firing on decell ??

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
chris2712au
 

Posts: 343
Joined: Thu Jun 19, 2008 1:52 am
Location: sydney australia

s15 back firing on decell ??

Post by chris2712au »

got me stumped what is going on with it... any ideas I thought it might be my rear housing on the turbo but not sure as I have also heard others with the same prob when they went to a free flowing exhaust ??
TM_S13
 

Posts: 246
Joined: Mon Dec 29, 2008 11:29 pm

Post by TM_S13 »

it's not uncomon to get a bit of back firing on decel with a free flow exhaust...
chris2712au
 

Posts: 343
Joined: Thu Jun 19, 2008 1:52 am
Location: sydney australia

Post by chris2712au »

can we reduce it or eliminate it ? i see that map ign advance on decel..??
Legionnaire
 

Posts: 125
Joined: Fri Oct 03, 2008 5:45 am
Location: Moscow, CFD, Russia

Post by Legionnaire »

If you mean flames from exhaust on deceleration, I actually like how it looks to be honest :oops:

But I guess you should really reduce amounts of injected fuel in high rev/low load area, i.e. the leftmost column of the fuel map
Cheers,
Petros Katunian
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

I'm thinking the fuel cut/recover tables. Same issue on my R34 which I need to fix up by adjusting where it does the cut

Get a log with the rpm vs injection to find where the injection is when you here it pop. Try and cut it out earlier

If you have S14/S15 I havent got the fuel cut/recover tables for that yet but its on my todo list
chris2712au
 

Posts: 343
Joined: Thu Jun 19, 2008 1:52 am
Location: sydney australia

Post by chris2712au »

2k and under tps closed no load just coasting in gear.. but mines an s15... :(
Post Reply