Datalog showing incorrect AFR

Delox · Post by **Delox** » Tue May 05, 2009 2:51 pm

The beta did the trick! thanks

Fordy · Post by **Fordy** » Mon Sep 21, 2009 1:35 am

sems ive got this very same issue with a lc1 aswell

Matt · Post by **Matt** » Mon Sep 21, 2009 10:11 am

running 0.9.12b should resolve that issue if you use that one

Delox · Post by **Delox** » Mon Sep 28, 2009 3:54 pm

Matt, I just switched nistune over to my new laptop. Only ran in to one problem which was related to the one which I started this thread about. I am receiving 2 different readings from my wideband (lc-1). On the initial window which pops up I start the connection to the wideband in nistune, I see what looks to be normal numbers (around 14 say), but on the fuel map and any other window i get weird readings (around 8 or so). I am receiving these simultaneously. Mind you my new laptop is vista if that matters.

thanks for any input!

Matt · Post by **Matt** » Mon Sep 28, 2009 5:00 pm

can you post a screenshot?

Delox · Post by **Delox** » Tue Sep 29, 2009 3:58 am

I'm not in my car right now so I can't get an actual example, but I will when I can. In the mean time, these are the locations I'm talking about...

Fordy · Post by **Fordy** » Tue Sep 29, 2009 4:03 am

same problem i was suffering delox

try deleting the 2 files in the nistune directory
mts.dll
mtssdk.ocx

then reinstall your version nistune with innovate support

if that dont work try the same as above but installing 9.12b..... that worked for me