ka24de ecu's

Bernardd · Post by **Bernardd** » Fri Aug 18, 2006 6:51 am

can a consult be used for maptrace and such with nistune yet? i've got a couple of ka guys want tunes asap.

Matt · Post by **Matt** » Fri Aug 18, 2006 10:54 am

yep i can get an address file to you to use for maptracing stuff

we have working S13 SR20/KA24DE boards as of last week also which is good. need a slight firmware fix and some more boards made before we get some out for testing. let me know if you are interested in one of those

Bernardd · Post by **Bernardd** » Sat Aug 19, 2006 12:04 am

please send me the address file, and depending on how long it takes to get the board i'll take one of those as well.

Twin-turboZ · Post by **Twin-turboZ** » Sun Aug 20, 2006 11:25 am

sign me up for a SR/KA board as well as the z32 board

Matt · Post by **Matt** » Mon Aug 21, 2006 5:15 pm

no probs. I think I just got early S14 going this morning also with the boards. Next up is S15...

Bernardd · Post by **Bernardd** » Fri Aug 25, 2006 12:42 pm

bump, need that .adr file matt.

Matt · Post by **Matt** » Fri Sep 01, 2006 3:47 pm

thats been sent. probably email me for those things to guarantee a response!

Twin-turboZ · Post by **Twin-turboZ** » Wed Sep 20, 2006 1:31 pm

Could i have that address file as well please and thanks.. I have a friend with a turbo charged KA that just changed injectors and MAF and wants me to re-dyno tune it for more boost.

Are the S13 NVram boards up and running? I am trying to hold him off until the boards are ready as it would be a good test and also much easier than burning changes to chips....

Rune

Bernardd · Post by **Bernardd** » Thu Sep 21, 2006 1:20 am

Sent to the venom motorsports email addy. I'll be getting at this on thurs if all goes to plan.

Matt · Post by **Matt** » Thu Sep 21, 2006 1:21 pm

S13 boards are running. I can get one of those send through at the same time as the Z32 board is ready if you want

PLMS have a few guys helping with testing on that side too and we are doing some dyno tuning tomorrow with one, getting small bugs out of the system

Twin-turboZ · Post by **Twin-turboZ** » Thu Sep 21, 2006 1:47 pm

Got the address file thanks Bernard..

Matt, for the S13 KA24DE i have been using Pete's boards and they seem to work well, In fact i think i was the first to try them on the ka24de.
Its just a bit tedious to burn chips for each tuning change, so it would be ideal to use the NvRam for tuning and the could always use a daughterboard with finnished tune.

I have a spare KA and Z32 ecu waiting for the Nvram boards, so definitely send both, i should be able to give them a good workout.
Do you need Ka24de Binaries for the patch code as well?

Matt · Post by **Matt** » Fri Sep 22, 2006 4:20 pm

yep need the binaries too. i'm getting a collection of all the different ROM image versions for most nissans now

the NVRAM boards are designed to be a replacement daughterboard, so they can sit in there permanently. Especially for the soldered in type later ecus

Twin-turboZ · Post by **Twin-turboZ** » Mon Sep 25, 2006 7:01 am

I will see what i have to add to your list.
have a couple of S13 ecu's here that i need to try to power up on the bench to extract the stock binaries.