Page 2 of 2
Re: Speed Desnity??
Posted: Fri Dec 24, 2010 5:53 am
by CoZZm0
FHCRSky wrote:Interesting subject.
Tomei were able to get MAP sensor, IAT sensor, Barometric sensor to work with stock GTR ECU and it works. Same with SR20DET ECU. Also they have base ROM data for SR, RB26 that you can download to load onto their ECU's.
On the stock ECU? or on an ECU fitted to the stock casing (i.e their Reytec ECU)?
Re: Speed Desnity??
Posted: Fri Dec 24, 2010 2:06 pm
by FHCRSky
Reytec ECU.
Oh, so your saying it's similar to Link ECU board (map sensor) that fits into stock ECU casing???
Re: Speed Desnity??
Posted: Fri Dec 24, 2010 4:51 pm
by CoZZm0
Reytec is TOMEI's version of the PowerFC as far as i'm aware.
Factory type casing and plug, but with redesigned hardware inside, that is similar, but removes those certain limitations.
Version of the PowerFC such as the DJetro or whatever they are that use MAP instead of AFM were made but i don't know how extensive that range was with regard to the SR crowd (if at all).
Either way, their code/software is not usable on the factory ECU.