Nistune Forums

Timing will be adjusted based on the RPM vs 'Idle speed RPM' table

Here is a few pics i took of log files i generated using nistune. It shows the timing being retarded, after hitting operating temp of 80c. Timing is being retarded down to 0 degrees, full throttle, during boost transition. This condition will disappear shortly after. Usually 5-10 mins.

I see a value in the "Flag Settings" called "Detonation Ign Retard". Also "Knock TP Threshold Min & Max". What do these values do?

Detonation ign retard is amount of timing to reduce by each increment

TP Threshold - From memory was the range TP (index) had to be in when looking for knock