Nistune Release 1.2.99

[Topdog781]

I own a 1991-1994 Nissan sentra, alot of us do the Sr20ve swap. Is it possible to make a base map for this car using this engine. Currently we use the sr20de map and that is kind of whacky .... to me at least.

[ChrisMan287]

I was disappointed to see the Z32 MAF not in the VQ Translation Function Generator. Can that be added?

Aside from that everything is working fine. One small annoyance was that both of my ROM File Packs were outdated. Every time I opened Nistune, it would ask if I would like to update both packs. I'd click yes, they would download but never install. I downloaded and installed them from the support page and that solved that.

[Matt]

I own a 1991-1994 Nissan sentra, alot of us do the Sr20ve swap. Is it possible to make a base map for this car using this engine. Currently we use the sr20de map and that is kind of whacky .... to me at least.

Would need someone to supply a base map for this ECU to then provide it to others. We don't do those conversions here

I was disappointed to see the Z32 MAF not in the VQ Translation Function Generator. Can that be added?

The Z32 MAF is a fixed sized AFM (not a slot) and I dont have the polynomials for this one to make it work.

Every time I opened Nistune, it would ask if I would like to update both packs. I'd click yes, they would download but never install.

There must have been a problem where it was trying to download them to. Check the ROM path folder inside Nistune (it should try and install to that folder). Manual updating is the work around

[Matt]

Version 1.2.43

Add R32 GTR versions of VQ maps (R35 MAF and Z32 MAF half size)
Increase total VQ map listing support in software
Update VLT/Z31 flex RAM addresses for displaying ethanol content etc
Improve Feature pack ECU and file detection
Add import functionality to feature pack ECU
Add coil pulse length reporting for S13 SR20DET
Add feedback switch 3 for S14/S15 SR20DET (fan control)
Add VCT_RPM_ENABLE for SR20 engines (replace VCT_RPM_RECOVER)
Fix bug where 74L0F is detected as 11U00 (R32) due to multiple ECU part# in filename
Add Type 1 USB auto detection back in (when Type 2-5 board selected)
ECU FP scan to use first three digits only of second identifier

Latest release updates are to support Z31 300ZX/VLT RB30/S13 CA18 Type 1 boards as well as some other changes
I've improved the feature pack auto detection (and auto import non-FP files when people try and load them)

[Matt]

Version 1.2.44

Add CTRL-SHIFT-Q repair option to consult (uploads entire maps region)
Add checking 69Fxx > 74FxF feature pack
Remove extra USB driver debug tracers
Fix CA16DE MAF offset lookup
Update ECUID scanning to detect ECUID in feature pack BIN files
Add check if current grid view selection not available (dont display blank entry)
Remove min/max memory limits from feature pack address files

Minor fixes added plus repair option added due to customer issue (messing up feature pack base maps)

[Matt]

Version 1.2.45

Fix wideband base path location setting in File > Configuration
Fix UEGO lambda reporting does not log leaner than 1.0
Fix PLX iNPD input vacuum reporting PSI
Add warning when changing values with standard consult connected
AFR auto tuner updates (flag to learn or not with SPACE bar)
Fixes for AFR Auto tuner LEAN/RICH reporting
Allow direct entry on maps in different views (AFR, filtered)
Add interpolation on cells horizontal/vertical/bilinear
Allow keyboard input for register and map copy selection
Add function key - logging hot keys
Z31 Feature pack - MAF reporting stuck 2-7 volts
0000090: AFR tracer window - Fix up average cell reporting
0000135: Clicking cells on Input Tracer displays current values for that cell
0000130: When loading MRU file - add option to select which slot
0000061: Add selective import maps feature
0000103: VQ map load and save option
0000133: Update documentation
0000043: Add auto close old windows to avoid too many
0000131: Keyboard shortcut for swapping main/comparison images
0000063: Add tooltip to translation file (Japanese support)
0000072: Alert user when making changes in stream mode (auto change modes)
0000071: Feature pack auto import detection
0000070: Add licence upgrade option
0000083: R32 VCT addiition - add in highlight VCT for RB25 ECU option
0000065: Add VTC to BNR32 ECU (RB26 FP1)
0000078: S14A Fan control issue

Been very busy with this release! Now the ability to smooth (interpolate) maps and tables. Direct entry into AFR and filtered cells. ENTER key will raise a prompt (similar to LinkG4 data entry). Various updates and bug fixes...

After this release I will be looking back into firmware issues which are currently on my list. Doing the application software updates is a lot quicker and better return for time than firmware so I was able to get through a fair bit (with a good chunk of overtime and weekend work)

[Matt]

Version 1.2.46

0000140: Log scalings between combo/log view for AUX do not match
0000142: AFR tracer windows - issues raised

[Matt]

Version 1.2.47

0000138: Add tables B14 SR20DE
0000147: Add map smoothing function
0000146: Add REDO feature
Fix bug with minium cell entry (cannot reach 0)

[Matt]

Version 1.2.48

0000087: Consult connection: Selecting too many items in parameter resulted in missing flags
0000145: Problem switching stream to tuner mode automatically (too many consult registers)

Version 1.2.49

Hotfix for consult connection. Deselecting items may result in TP deselected on earlier ECUs
Updates for engine simulator comms package

[Matt]

Version 1.2.50

Engine sim script input updates
Consult stream mode fix (removing extra registers from display)
Bug fix for consult display for N15 Autech ECU

[Matt]

Version 1.2.51

Engine sim interface updates. Stop and pause features
Add high gear map to Y60 TB42
Add fuel cut/recovery tables back into R31/VLT
Fix Y33 RPM scale and add Y33 VQ map
N15A GA16DE VE trace initial updates
Fixes for AEM UEGO handling of corrupt data
Add M30 TB45E ECU extra TIM parameters and launch control
Fix knock panel freezes when beeping in stream mode
Add cold start enrich B14 SR20DE

[Matt]

Version 1.2.52

Version 1.2.52
Add enrich and boost flex offset parameters
Limit knock sound warnings
Add CTRL-I to interpolate
UEGO error handling fixes
Add supplementary wideband sensor for PLX IMFD recording and playback
Migrate all current wideband classes to supplementary wideband code

Been a while since last release... got married went on honeymoon etc. Now life back to normal again! Still working through the software list but added some more urgent items to the list with regards to things not working as they should

[unex]

Been a while since last release... got married went on honeymoon etc. Now life back to normal again!

i think you are married nistune long time ago.... congrats for having strength to have double life

[Matt]

Yeah I was but didn't work out so well... let just say Nistune has lasted longer!

[Matt]

Version 1.2.54

Invert AC enable flag S14A/S15 SR20DET
Add NEO WC34/ER34 VE index and boost compensation tables
Add extra TPS/boost VE indexing register to stream mode (WC34/ER34/P11/K11) CONSULT_REGISTER_19
Add Y33 TP stream tracing
Fix bug menu items not operating when table cell selected
Add unknown TPS/RPM VE index tables (expert mode only) for ER34/WC34
Additional checks for invalid memory address writing to consult
Add K11 VE tracing
Add C35 RB25DET
Fix ECR32 RB25DE address entries

The main parts for this release is adding stream mode tracing to some ECUs on the VE maps. Further tables for how VE works are explained in the NEO Tuning information document on our website
http://nistune.com/docs/Nistune%20NEO%2 ... Tuning.pdf

Note: Nistune packages will now be dual signed SHA1/SHA256 as required by Microsoft from 2016 onwards using an updated code signing certificate. This may mean that Microsoft Smart Screen will prevent the application from installing until I have established a reputation with the new certificates. In the process of doing this with Microsoft at the moment...