Page 2 of 5
Re: Nistune 1.3
Posted: Sun Mar 31, 2019 5:53 pm
by Matt
Are the external CSV files for WB still used?
So can I just copy my modified version into the WB directory?
You will notice that the Wideband 1 / 2 folders in the Folders tab are the ones which are used
They are no longer combined, which then allows separate use of AUX1-6 and AUX1-6 for each wideband unit, for the selected wideband. For example WB1 can use AFR1, AUX1-3 and WB2 can use AFR2, AUX4-6
Re: Nistune 1.3
Posted: Sun Mar 31, 2019 9:59 pm
by Matt
Version 1.3.2
Fix: Adjusted TPS broken from consult speed updates
Re: Nistune 1.3
Posted: Sun Apr 07, 2019 4:02 pm
by Matt
Version 1.3.3
Fix: Where ECUs missing TP register in consult table (stream mode), add this back in
Fix: Motec PLM lookup table removal. No interpolation for AFRs
Re: Nistune 1.3
Posted: Sun Apr 14, 2019 8:46 pm
by Matt
Version 1.3.4
Fix: Crash fix due to change with logger name
Re: Nistune 1.3
Posted: Tue Apr 16, 2019 6:37 am
by jj205mi
I am still just learning, but i really like the changes to the software and the way it looks. Its good that you keep the updates coming, thanks!
Re: Nistune 1.3
Posted: Mon Jul 22, 2019 6:30 pm
by Matt
Version 1.3.5
Fix: Crash fix when ECU status window closed, and TP warning event occours
Add right click option to remove shading for modern gauges, for display speed improvement
Fix: Log play back issue, playback with wideband entries mixing up sensor data with names
Fix: Live emulation updates on individal cells not functioning (emulator only)
Fix: Write adjusted TPS on NEO ECUs only if not PIN locked
Fix: Consult register window displaying twice if window up for more than few seconds
Re: Nistune 1.3
Posted: Sat Jul 27, 2019 3:11 pm
by Matt
My installer package was updated and no longer supports Windows XP. Some people are still using this OS apparently. I've gong back to an older version of the installer, and 1.3.5 is now available for XP still
Re: Nistune 1.3
Posted: Sun Aug 18, 2019 1:53 pm
by Matt
Verison 1.3.6
Add AFR editing for CSV from Config Wideband menu
Fix: PLX iMFD log replay not showing channels
Re: Nistune 1.3
Posted: Mon Sep 02, 2019 9:13 pm
by Matt
Version 1.3.7
Fix: Logger open file after record blank. Fix state change
Logger play in record mode activated. Other minor log fixes
Added: Right click open constant/table group feature
Increae font scaling for multi guages
Clear DTC from the lower status window
Add knock parameters to application. Some address files updated
Add right click display knock detection region
Fix for table gird sizes in consistent/independent mode
Add BDTC parameter for timing tables
Fix constant display converion problem with decimal point numbers
HR31 TIM FP support added
Re: Nistune 1.3
Posted: Fri Sep 20, 2019 2:04 am
by nismoS14
Hi,Matt
A warning is displayed at startup after switching to version 1.3.7.
Re: Nistune 1.3
Posted: Sat Sep 21, 2019 10:45 am
by Matt
I've fixed the warnings in the address files and reuploaded that version
Re: Nistune 1.3
Posted: Sun Sep 22, 2019 8:20 pm
by Matt
Version 1.3.9
Crash fix for window positioning updates
Version 1.3.8
Add extra VQ maps
M30 Address file udpates
Various crash report fixes
Re: Nistune 1.3
Posted: Tue Sep 24, 2019 9:38 am
by my1path
I like the the startup guide! Reviewing it was useful but I would like the option to not see it every time I launch the software.
On the main timing and fuel maps the buttons below the map disappear when the upper or side menus are clicked on. Cliking the map moves the map to the front but not the buttons. They remain hidden until the main map is either moved or closed and re-opened.
Re: Nistune 1.3
Posted: Tue Sep 24, 2019 10:20 am
by Matt
Right click the startup to prevent it reopening
Something to do with window reodering and opening is not pushing the bottom panel to the front. I need to investigate further
Re: Nistune 1.3
Posted: Thu Sep 26, 2019 4:13 pm
by Matt
Version 1.3.10
Fix: Increase screen pixel limits for window positioning and max size
Fix: Ethanol reporting incorrect
Fix: Channel selection ordering change