S14a SR20DET bucking at cruisung

[PL]

Good to hear that you're getting somewhere with this.

I'll have a play around on the bench with the load values and see if anything can be done.

Definitely try decreasing IGN values in that area as this can have a major affect.

PL

[Pinto]

Problem solved!!

I found a solution to trick the VTC, so that it´s not activated while cruising:

At first i set the "VTC RPM Enable" up to 3.250 rpm, and then the "VTC Load Enable" to a value that the VTC is "off" while cruising, and goes "on" when you slightly accelerate, independently to the RPM.. I think the value was 24. You can see that very clearly at the VTC-Flag in Nistune to find your perfect value.

Its so goog to cruise around at low speed/low rpm without jerk

[Matt]

Good stuff! Yeah setting one higher than the other will force it into turning on later