Nistune Forums

That maxima ECU looks like a Z31 ECU... it might work if we can get you connected. try the Z31_VG30_128_87-89_E.adr file in the ROM image pack and then try the connect button and let us know what you get

Yep you can use another 1986-1989 Z31 ECU if you wish to just socket and plug into that instead...

But see how the maxima ECU goes you might be in luck

matt your the MTFM! nistune works works but car dosent start im gonna put it in the other spare ecu that i have. which is a clone of the one that im running now. just didnt wanna screw it up. now i gotta read a bunch of shit on how to tune this mofo and see if i cn find someone with a wideband that i can borrow.


THANKS MATT

btw you got some reccomended sites of info to read for tuning??

Documentation at www.nistune.com there is a tuning guide Pete has put together

thanks

I did an Max ECU and it does work. The one I used was out of an 88 Max #A18-696-E89
It has to have a certain chip in it to work
Bennard is more up on this than me. Check out this thread, post #http://forums.hybridz.org/showthread.php?t=10495

We used it in an 88 Z31 and used a Z adr file

it works in the one i have as well plus i still have the 300zx ecu so im almost done just gotta get the z32 300zxtt injectors

got a question, a pin on the nistune board broke off, and the ppl here in california dont seem to know where i can get a 28 pin male to male socket thingy. so my question is, what do i do now....


do i have to buy a new board??


the pin that broke off i tried to solder to it and to the eprom socket and nothing happens, no fuel pump wine.


any suggestions...

either send the board back, or I can send out a pin if you can install it properly. you need to desolder the back of the old pin, then cut the plastic away using a thin blade

After that put in the new pin, line up using a spare socket and then solder the top and then super glue small blob between plastic

Those pins arent easy to come by

yeah i figured that much went to several circut stores and no one can source it.

i think ima ship it to you just so that its done right. pm me your address so i can ship it out asap thanks!

Nistune Developments
Matt Brown
PO Box 219
Salisbury South SA 5106
Australia

lemme know when you get it and what you can do for me, if its gonna cost money lemme know how much


thanks!