Page 11 of 21
Re: Launch control
Posted: Mon Aug 15, 2011 11:14 am
by Matt
No updates launch control. Not until December at least when things quieten down at bit!
Re: Launch control
Posted: Wed Oct 26, 2011 6:27 pm
by guricha
Matt wrote:No updates launch control. Not until December at least when things quieten down at bit!
Matt any news will be available reg this issue ?
Re: Launch control
Posted: Wed Oct 26, 2011 6:34 pm
by Matt
Its not really an issue. Its an enhancement which gets done after emails, orders, problem solving and bug fixing. I will have more time from November for the last two since going full time
Re: Launch control
Posted: Wed Mar 21, 2012 4:09 am
by Vetal
Guys what are rev limiters 3 and 4? Maybe we can use them for launch control? When do they become active?
Re: Launch control
Posted: Thu Mar 22, 2012 12:14 pm
by Danielmcn
Vetal wrote:Guys what are rev limiters 3 and 4? Maybe we can use them for launch control? When do they become active?
I was wondering the same thing....
Re: Launch control
Posted: Mon Mar 26, 2012 1:06 pm
by Danielmcn
Any new info on 2 step and nistune?
Re: Launch control
Posted: Mon Mar 26, 2012 5:04 pm
by Matt
These are on hold whilst progress on application software updates continues
Re: Launch control
Posted: Mon Mar 26, 2012 5:13 pm
by Vetal
What about rev limit 3 and 4, can you explain them?
Re: Launch control
Posted: Thu Mar 29, 2012 2:14 am
by skyline_stu
I'm working on the launch control routines for almost all the ecu variants - it's a big job !!
Remember, I've got S13 available now and will have GTR available shortly (PCB's are being manufactured atm). Then it's onto the Z32 and S14/15. The GT-r version has a user defined antilag timing retard table included. There is a hardware add on board needed for this to run correctly though - This will also address maximum RPM limits on the S series ecu's.
Re: Launch control
Posted: Thu Mar 29, 2012 2:30 am
by Vetal
skyline_stu wrote:I'm working on the launch control routines for almost all the ecu variants - it's a big job !!
Remember, I've got S13 available now and will have GTR available shortly (PCB's are being manufactured atm). Then it's onto the Z32 and S14/15. The GT-r version has a user defined antilag timing retard table included. There is a hardware add on board needed for this to run correctly though - This will also address maximum RPM limits on the S series ecu's.
Soooo, is there a hope that we S13 owners get launch control (or more precisely, rev limiter) anytime soon?
Re: Launch control
Posted: Thu Mar 29, 2012 2:32 am
by skyline_stu
S13 CA or S13 SR ??
Stu
Re: Launch control
Posted: Thu Mar 29, 2012 3:04 am
by Vetal
CA18DET
Re: Launch control
Posted: Thu Mar 29, 2012 3:25 am
by skyline_stu
1. Do you have a base image programmer ??
2. What base image are you currently using ?
Just had a look at the CA18 code - it's taken almost all the rom space, but it should be easy enough to implement - might have to have a chat to Matt about a few technical things first..
Stu
Re: Launch control
Posted: Thu Mar 29, 2012 3:34 am
by BlueRB240
STU how much are you going to charge for the launch control? and rev limiter? I'm planning on buying the tuner licenses and a base image programmer in a few months. Do I send them to you? Mostly interested in the rev limiter control for the ODB1 B13's out here and ODB2. The ODB1's use the same ecu as the Primera P10.
Re: Launch control
Posted: Thu Mar 29, 2012 3:37 am
by Vetal
skyline_stu wrote:1. Do you have a base image programmer ??
2. What base image are you currently using ?
Just had a look at the CA18 code - it's taken almost all the rom space, but it should be easy enough to implement - might have to have a chat to Matt about a few technical things first..
Stu
If you mean one that can reflash 28-pin EEPROM that Nissan uses, then yes. Lol, long time ago I used to drive around with BIP and few chips and burned 4-8 chips per evening to tune my CA
"What base image" - not sure what you're asking...