Nistune Forums

FP1.1/FP2.1 next update available

Added vehicles:
S13 CA18DET
VL RB30ET
Z31 VG30ET

Nistune Version Beta 1.3.28 (EXE)
https://www.nistune.com/releases/Nistun ... _setup.exe

Nistune FP 3.0 ROM File Pack Beta 1.1 (EXE)
https://www.nistune.com/releases/Nistun ... ck_1.1.exe

Updated documentation and version numbering for current supported FP1.1 / FP2.1 boards. Still trying to get Z32 timer code working (interfered with by CAS timers) for boost control

is 1.1 available for all the boards v1 was in addition or or only those three models?

It is currently only those boards for Type 1, and Z32, BNR32, Y60, HCR32 for Type 2

Type 3 and Type 4 (selected models) needed some further updates for flat shift, and currently in testing

Nistune Version Beta 1.3.39 (EXE)
https://www.nistune.com/releases/Nistun ... _setup.exe

Nistune FP 3.0 ROM File Pack 2.13 [FP2 Version 1.3] (EXE)
https://www.nistune.com/releases/Nistun ... k_2.13.exe

Released 11 Apr 2022
- Adds FP1.1 for B13 SR20DE, P10 SR20DE, RNN14 SR20DET, S13 SR20DE, S13 KA24DE, S13 SR20DET, S14 SR20DET, S14A SR20DET, S15 SR20DET

Adds
- Flat shift
- Updated launch control (activated whilst button pressed only)
- Anti stall (Limit TP on throttle release)
- Crank voltage adjustment (low battery, add more injection)

There has been an update to the FP ROM pack today for FP1.1 for Z32 300ZX. Rev limits and launch control cuts were reported not working and I've rebuilt with the latest patch code and retested today

Matt wrote: ↑Sat Sep 10, 2022 1:06 pm There has been an update to the FP ROM pack today for FP1.1 for Z32 300ZX. Rev limits and launch control cuts were reported not working and I've rebuilt with the latest patch code and retested today

Hi Matt,
I'm a new Nistune user and have about 1 week under my belt learning Nistune on my 300zx. I noticed the rev limits weren't working and found this post after a bit of searching.

What do I need to do to apply the fixed ROM? My current tune is the base 300ZX TT/MT with some fuel adjustments and some RPM/TP scale adjustments. Do I need to load the corrected ROM and copy my changes into it, or is there an easier way to "fix" my current .bin file to make the rev limits work?

Unfortunately if it is 47P1H (only Z32 part affected) the board will need a reflash to the version released 14 October 2022

Try contacting CZP for the update. They can invoice me for the time if required

Thanks for the response and email Matt- much appreciated!

The Z is down for the winter, so perfect time to send it back to CZP. I need to place an order anyway

Thanks for the response and email Matt- much appreciated!

The Z is down for the winter, so perfect time to send it back to CZP. I need to place an order anyway