Nistune Forums

Hi!

PS ... when does this come on?

As for the resolution
Maybe your code could check what the resolution of the screen is, and then have different panels?
(Or just resizeable?)

It's kinda frustrating if you have a laptop with 1280+ (pretty low standard these days) and you can not see the full length of the filename (or other stuff)

I have a Netbook (1024) as well, but honestly just for logging and smaller changes.
Have a good Friday - good nite!

Hi Matt.

I've just noticed this now, but on Type1 Board, S13 CA18DET, the graph scales on the Timing Tables, specifically Idle/Decel RPM Timing, ain't corresponding to the adjustment table... it's really just the scale on the graph, the rest seems correct.
Just thought I'd let you know about it

okay thanks. will have a look

There's something very ennoying in the 0.10.11 (and maybe earlier versions):
_in the log player window, the 4th field (purple one) is lost each time you connect or reconnect Consult and/or widebands. It goes back to another (default ?) value (RPM typically) and I suspect it's because of the fields you add in the drop list as soon as you discover the new ones (e.g. LO2, RO2) upon Consult/Innovate connected.

My 4 fields are always the same for log (in the order):
Timing (red)
RPM (blue)
Throttle (green)
TP (load) (purple)

okay on the list

RomChip200 wrote:There's something very ennoying in the 0.10.11 (and maybe earlier versions):
_in the log player window, the 4th field (purple one) is lost each time you connect or reconnect Consult and/or widebands. It goes back to another (default ?) value (RPM typically) and I suspect it's because of the fields you add in the drop list as soon as you discover the new ones (e.g. LO2, RO2) upon Consult/Innovate connected.

My 4 fields are always the same for log (in the order):
Timing (red)
RPM (blue)
Throttle (green)
TP (load) (purple)

This is a bit more than that.
Each time you alter the "Select Consult registers":
1) The Consult link connection is dropped
2) It jeopardizes the fields of the log player (even if the corresponding consult registers are kept the same). This is because new registers selected are inserted in the middle of the list. Sometimes it has the same effect when connecting to Wideband (2 new fields LO2, R02 are added in the middle of the list)

Matt,

It would be very useful to have Nistune running and logging in one-click (... Desktop shorcut) for a given configuration (consult & wideband links already set up, consult registers already selected .....)
instead of having to do each time:
_launch nistune
_connect consult
_connect wideband
_go to menu to open log player
_push record button ...

i downloaded the latest software since i just got a new laptop cuz my old one crapped out. My product key no longer works and i cannot run nistune. I have the original key i got back in 09 when i bought nistune and my email address and everything is correct but i still will not let me in. I need to get this sorted out asap because my car is going back on the dyno this weekend.

RomChip200 wrote:Matt,

It would be very useful to have Nistune running and logging in one-click (... Desktop shorcut) for a given configuration (consult & wideband links already set up, consult registers already selected .....)
instead of having to do each time:
_launch nistune
_connect consult
_connect wideband
_go to menu to open log player
_push record button ...

As much as I hate to admit it, I was thinking the same thing the other day.
The next think you know I'll be liking croissants.

I can't imagine this would be too hard to program (time consuming yes). Maybe some sort of macro system?

Will be full time with nistune from next month so features like these will be more likely to be completed. Will have a look at the drop down boxes next week in the interim

With login issues probably a key entry issue. If still having hassles then best to email me for a fast response (havent been on the forums apart from account activations for last few weeks so only catching up now)

Each time you alter the "Select Consult registers":
1) The Consult link connection is dropped

Yes I've seen this one

For future bugs could you please create a new thread in the 'bugs' section. This thread is long enough (and hard to track) if issues keep on getting raised to it. I've noted the problems/suggestions on this page and will investigate over the coming weeks

Edit: just realised theres a new version

Should be getting another version after 0.10.12 out next week with more bug fixes also

Currently updating NTProg software to fix some issues

Hi Matt why do I get checksum erors when I try to use stream mode? Not sure if this was covered already

sent a response email. would need a debug log to investigate it