Nistune Forums

Posted: **Wed Jun 03, 2009 11:21 am**

Dont know if its a bug or not.. but the graph displays out of bounds...

Check the image attached...

This is using my .BIN file for the CA18DET
ROM PACK .BIN file produces same graph out of bounds..

Posted: **Thu Jun 04, 2009 7:40 pm**

File-Configuration- Table Filtered View

This will fix it up for the tables.

Will display 'Filtered' next to the table name when you display

But means that then you dont see the 'raw values' used by the ECU and can only make adjustments using +/- (not direct editing)

I would like to put a tick box on the table itself but not sure how i would present that yet

Nistune Forums

idle/deceleration Gear RPM Timing

idle/deceleration Gear RPM Timing