Nistune Forums

I've got a redtop with the skinny o2. I'm having trouble finding the voltage perameters for the LC-1's analog out.

I'm running an XD-16 gauge and have the analog1 outputs wired into the ECU's harness.

Any info will be greatly appreciated.

right now at 1v (read on the consult for o2) the car is dumping fuel at idle causing 10:1 af reading on the wideband.

By default, the lc-1 analog output 1 are 1.1V = 14AFR and .1V = 15AFR. The analog output 2 are 0V = 7.35AFR and 5V = 22.39AFR.

I'm trying to figure out what is the type of o2 sensor nissan use (this is on a s14 ka), so that i can output my analog 1 to feed to the ecu signal. Help me out if you know this info please?