Nistune Forums

Posted: **Wed Nov 04, 2009 5:12 pm**

See attached screen shot for what I'm talking about.

I'm not running rich all over the map, but at the very high RPM range under high load I've down to 4 in some cells on the fuel map, and I'm still running very rich.

I already adjusted the TTP MIN chart and that doesn't seem to be it.What am I missing?

I'm NA.
Ka24de s13 240sx with stock injectors and walbro 255.
Bolt on mods...

Posted: **Thu Nov 05, 2009 1:29 pm**

if you cant lean it out any further then you are going to have to use your injection mutliplier to pull the mixtures back

then you will have to increase your fuel map entirely to compensate (just highlight the whole thing and + to increase it)

then you will have more room to make it leaner at the top end

Posted: **Thu Dec 31, 2009 2:58 am**

Also, make sure its not reading from the knock map. Use the knock copy feature.

Nistune Forums

Fuel Map cell values almost 0 but still rich

Fuel Map cell values almost 0 but still rich