ca18de ecu problem

Waz · Post by **Waz** » Sat Nov 14, 2009 7:02 pm

hey guys, first post and stuff.

Got my nistune installed into my ecu and running, havn't done any tuning bar some ign changes due to awaiting arrival on my wideband.

Anyways, heres my problem.

It seems that something passed or before the ecu is burning something out in my ecu! It doesn't have effect on running of the car( It was damaged before the nistune board was installed)

The terminal number or what ever it is, is t370.

Anyone know what this does?

Thanks.
Waz.

Matt · Post by **Matt** » Mon Nov 16, 2009 8:33 am

can you post a pic of it?

Waz · Post by **Waz** » Mon Nov 16, 2009 8:57 pm

hey Matt.

Ive attached a picture below. The short is located 2thirds accross near the bottom.

Matt · Post by **Matt** » Mon Nov 16, 2009 11:35 pm

near the injector drivers, but without tracing not exactly sure what its for. a driver transistor of sorts. could be an output driver for something which isnt currently stopping car running (even check engine light)

Mydato · Post by **Mydato** » Wed Nov 18, 2009 9:55 pm

G'day Waz. Brad here. Trace the track back. It looks like it heads to the loom socket. Do you have a multi meter? If it does go to the loom find the pinout and cross reference. It's possible there is a short or dodgy sensor hooked up. Worst case give me a buzz 0406382364 and we can work it out at pizza night. Cheers