Hi, Currently from the WB screen in nistune the LambdaAFR is logged, I noticed there are 6 other blank/black boxes that I'm assuming are for other MTS sensors/device inputs to be displayed.
Can Anyone confirm if these extra inputs from the MTS chain also get recorded/logged in Nistune?
and
How are they individually identified?
KR
LMA-3 auxbox logging in Nistune
Moderator: Matt
LMA-3 auxbox logging in Nistune
Sime
http://www.jps.net.au
tuners@jps.net.au
Calibration Engineer
JPS Motorsports & Electronics
http://www.jps.net.au
tuners@jps.net.au
Calibration Engineer
JPS Motorsports & Electronics
they get identified by how they are defined inside LogWorks software
They gets recorded as 'aux1' ... 'aux6' but then during playback if the LM-1 was connected the labels get renamed to what logworks has defined
It worked last time someone in Adelaide was using Aux box with their LM-1 so I know it works
They gets recorded as 'aux1' ... 'aux6' but then during playback if the LM-1 was connected the labels get renamed to what logworks has defined
It worked last time someone in Adelaide was using Aux box with their LM-1 so I know it works