Page 1 of 1
K value needed for z32 and nismo 740cc ??
Posted: Tue Mar 02, 2010 9:14 pm
by koukimonster
Can anyone help me ?
with K and latency value for z32 afm and nismo 740cc injectors, std fuel pressure.
It will make tuning ALOT EASIER!!.
Re: K value needed for z32 and nismo 740cc ??
Posted: Wed Mar 03, 2010 12:10 am
by Matt
what about the one that comes from using resize injectors and MAF to use as a starting point?
Re: K value needed for z32 and nismo 740cc ??
Posted: Wed Mar 03, 2010 12:40 am
by koukimonster
Agree with you matt, but if someone has the exact k value, it would be even easier!!.
Anyone ??
Re: K value needed for z32 and nismo 740cc ??
Posted: Wed Mar 03, 2010 5:52 am
by skylinegtrhr
Can You please post what car, engine and what turbo, manifold?
I have on my car (S14) Z32 maf 740cc but with GT28RS and JUN intake manifold and everything is affecting A/FR and K-value...
If You have something similar I can check what my K-value is, but I suggests You that You find exact value for Yours set up as is describe in NIStune manual...
Re: K value needed for z32 and nismo 740cc ??
Posted: Wed Mar 03, 2010 8:49 pm
by koukimonster
Same setup as yours, except im using the std intake manifold!!
K value and injector latency for 740cc nismo, z32 afm and std fuel pressure !!
Thanx, please let me know ?.
Re: K value needed for z32 and nismo 740cc ??
Posted: Wed Mar 03, 2010 11:32 pm
by all shal perrish
why wouldnt you just tune it for your setup? thta is definatly the way to go... you might as well just got a pretuned ecu if you werent going to bother with making it custom for your setup..
Re: K value needed for z32 and nismo 740cc ??
Posted: Thu Mar 04, 2010 1:36 am
by skylinegtrhr
koukimonster wrote:Same setup as yours, except im using the std intake manifold!!
K value and injector latency for 740cc nismo, z32 afm and std fuel pressure !!
Thanx, please let me know ?.
I did send You these data in PM, but every car is different , when I just put GT28RS and tubular manifold and everything else was OEM car was lean and we have to adjust K...
We don't have good experience with generic maps...