Page 1 of 1
Video : How to replace Nistune board broken pin (10Mar2010)
Posted: Thu Mar 11, 2010 5:35 am
by louiswun
Re: Video : How to replace Nistune board broken pin (10Mar2010)
Posted: Thu Mar 11, 2010 11:16 pm
by Mydato
good work la
Re: Video : How to replace Nistune board broken pin (10Mar2010)
Posted: Fri Mar 12, 2010 7:57 pm
by MichaS14a
Good video with good ideas e.g. the desoldering with the masked vacuum cleaner pipe. I didnt't know before that this works.
Re: Video : How to replace Nistune board broken pin (10Mar2010)
Posted: Sat Mar 13, 2010 4:40 am
by louiswun
I have just test it on today, the board works fine
Re: Video : How to replace Nistune board broken pin (10Mar2010)
Posted: Sat Mar 13, 2010 7:52 am
by BlueRB240
nice vid.
Re: Video : How to replace Nistune board broken pin (10Mar2010)
Posted: Sun Mar 28, 2010 7:52 pm
by brother_david
Nice vid!
Something similar happen to my last board.. Believe it or not but a dog actually took a bite at it
A friend of mine works with setting up electric cables in compartment buildings but he also knows his way around soldering.
Anyway, he was going to solder up the board so i left it there, in the nice purple bubble plastic it comes in. He has also got Scandinavias biggest Dobermann, one of the kindest dogs i've met though.
This dog found the bubbple plastic wrap around the board intresting and simply had to taste it during the night
Got acouple of broken pins but was fixed in the same way as in the vid! Got some bitemarks in the board too but worked fine none the less.