Launch Control AVAILABLE for S13 SR20DET
Posted: Sat Apr 10, 2010 12:21 am
Hi everyone,
I've created a launch control enhancement for those of you who have a S13 SR20DET's. It allows for full throttle launches on your Type3 equiped Silvia - great for those of you drag racing on standard tyres. The improvement in traction really has to be experienced to be believed. If your running slicks at the track this will give you a real advantage over trying to optimize RPM vs Throttle position vs Clutch slip. My 'test pilot' has given it a thumbs up, before all it would do was bake the tyres in the first few gears. Now YOU can get going cleanly without excessive, time slowing wheelspin.
Here's the link to the test video :-
http://www.youtube.com/watch?v=WfuGsJmXQfo
It will only cost you $15 plus the P&H (express post bags are cheap & fast), your ECU or Nistune Type3 board will need to be sent to me for the firmware to be updated - you'll recieve back your original tune with the rewritten code.
Here's also a solution to international uses wanting my upgraded firmware for your S13 SR20DET Type 3 board. I can offer an exchange board (normal Nistune board prices + my AU$15 firmware upgrade + postage). I can offer a refund on the board upon recieving your current board (obviously minus the AU$15) after testing your Type 3 operates. It would be supplied with the STANDARD 50F00/50F05 base image, all you need to do is load your current file and resync. I'll Email you an updated ADR file and instructions for use
Stu
Any questions ? Send me a PM !!
Cheers,
Stu
I've created a launch control enhancement for those of you who have a S13 SR20DET's. It allows for full throttle launches on your Type3 equiped Silvia - great for those of you drag racing on standard tyres. The improvement in traction really has to be experienced to be believed. If your running slicks at the track this will give you a real advantage over trying to optimize RPM vs Throttle position vs Clutch slip. My 'test pilot' has given it a thumbs up, before all it would do was bake the tyres in the first few gears. Now YOU can get going cleanly without excessive, time slowing wheelspin.
Here's the link to the test video :-
http://www.youtube.com/watch?v=WfuGsJmXQfo
It will only cost you $15 plus the P&H (express post bags are cheap & fast), your ECU or Nistune Type3 board will need to be sent to me for the firmware to be updated - you'll recieve back your original tune with the rewritten code.
Here's also a solution to international uses wanting my upgraded firmware for your S13 SR20DET Type 3 board. I can offer an exchange board (normal Nistune board prices + my AU$15 firmware upgrade + postage). I can offer a refund on the board upon recieving your current board (obviously minus the AU$15) after testing your Type 3 operates. It would be supplied with the STANDARD 50F00/50F05 base image, all you need to do is load your current file and resync. I'll Email you an updated ADR file and instructions for use
Stu
Any questions ? Send me a PM !!
Cheers,
Stu
PM sent