Page 1 of 1
P11 Primera SR20DE
Posted: Sun May 09, 2010 10:10 am
by Klauss
Hi, is there any nistune board available for P11 Primera with SR20DE engine?
I found only post from year 2007, where is supported only P10 Primera ECU.
Thanks for information.
Re: P11 Primera SR20DE
Posted: Mon May 10, 2010 8:19 pm
by Matt
Yes we do that one now. I have a P11 ECU here for testing boards also. Type 4 board
However they use a bosch ECU and the frame does not take any boards. You need a frame from S14/S15 or similar ECU so the Type 4 board will fit and screw in
(or mill out the existing frame and tap it... too much work)
Re: P11 Primera SR20DE
Posted: Mon May 10, 2010 9:05 pm
by steve_s13
Ill be milling out a P11 for a lad here in the UK Matt, so Ill try and do a step by step if anyone is interested
Re: P11 Primera SR20DE
Posted: Mon May 10, 2010 9:09 pm
by Klauss
steve_s13 wrote:Ill be milling out a P11 for a lad here in the UK Matt, so Ill try and do a step by step if anyone is interested
Of course it will be interesting.
I want upgrade frame too.