Page 1 of 1
tps voltage
Posted: Mon May 17, 2010 2:17 am
by Fordy
can somone confirm for me that the tps voltage on wot when hot on a s14 sr?
i've got 0.46v just before it flicks the closed switch off when hot but at wot only seeing 4.10-4.20v
also the tps enrichment trigger is set to 5.1volt so im assumming either my tps is knackered or the trigger is set to high

Re: tps voltage
Posted: Mon May 17, 2010 4:47 am
by MichaS14a
Fordy wrote:can somone confirm for me that the tps voltage on wot when hot on a s14 sr?
I think 4,1 Volt is okay at WOT.
The Manual says "about 4,0 Volt at WOT".
At closed throttle there must be 0,35 - 0,65 Volt.
Re: tps voltage
Posted: Mon May 17, 2010 6:27 am
by Fordy
hmm so in theory the tps enrichment trigger should be at 4.1volts not 5.1 volts?
Re: tps voltage
Posted: Mon May 17, 2010 7:07 am
by MichaS14a
Sorry, I don't know exactly where you are in the map.
Do you mean "TPS Enrichment Trigger"? This is set to 5,1 V (Value 255) in all SR20 Maps I opened so I think this is okay.
Re: tps voltage
Posted: Tue May 18, 2010 6:28 am
by Fordy
tried lowering the trigger to 4.1v and didnt notice any difference in running altho i didnt log back to back
Re: tps voltage
Posted: Wed May 19, 2010 12:42 pm
by PL
Yep, just over 4V is pretty normal at WOT.
I assumed the SR's don't use that "TPS Enrichment Trigger" function.
Must try playing with it some time...
PL