Page 1 of 1

Live data configurable?

Posted: Tue Jan 31, 2006 4:17 am
by Stinky
Two things.

- Is it feasable to make the life data window user configurable?

- Is there any advantage in being able to enable/disable unwanted data streams (aac, fault codes,..) in order to get better resolution on other data?

Posted: Tue Jan 31, 2006 4:41 am
by Matt
standard consult (rs232 9600bps) can be cut back with less sensors to run full streaming mode, until there is an update made. this can run a higher resolution

usb consult should also be able to do the same. it doesn't need to run anything cut back since usb works in packets and timesharing. all data is retrieved at once.

this stuff will require some tweaking. it also depends on how fast the ecu can push it out too. should be able to get it better

i could make things a bit user configurable but i dont really want to as it makes other things hard (logging etc would need to know what is on/off)

usually we sacrifice timing for speed of the software since there is more for the software to process which in turn slows down trying to use it for tuning