Nistune Forums

Hi Matt,

I'm using B13_SR20DE_256_E_91_92.adr file, which includes BASE_SR20_KA24_256_E.ADR file.

BASE_SR20_KA24_256_E.ADR have next (very useful) maps:

IDLE_TIMING_NEUTRAL,&H0460,16,1,16,1,Idle timing (neutral)
IDLE_TIMING,&H0470,16,1,16,1,Idle timing (in gear)

I can use these maps via standard (not realtime) boards, but I didn't see these maps in Nistune.

Any solution for this issue?

--
Roman

so?

it should show up as

Idle/Decel RPM timing
Idle/Decel RPM Neutral timing

It is only when I put 0000 address against an address file entry does it remove it from displaying