Page 1 of 1
Z32MAF vs CobraMAF?
Posted: Mon Oct 04, 2010 2:52 pm
by nissangts
Which one of the above mentioned MAFs measures higher? I heard that when the Z32 was exeeded, the Cobra MAF could be used as a replacement.
Re: Z32MAF vs CobraMAF?
Posted: Wed Oct 06, 2010 6:16 am
by nissangts
So nobody knows anything about this?
Re: Z32MAF vs CobraMAF?
Posted: Wed Oct 06, 2010 9:13 am
by Bernardd
The cobra maf can read about 450hp at 5.12 vdc. The z32 maf is at about 600hp. That's crank hp.
Re: Z32MAF vs CobraMAF?
Posted: Thu Oct 07, 2010 1:13 am
by nissangts
Thanks B I figured the Z would edge out the Cobra.
Re: Z32MAF vs CobraMAF?
Posted: Thu Dec 09, 2010 11:40 pm
by Legionnaire
Agreed, my recent calculations based on Nismo data show that Z32 AFM is capable of ~580hp (1745 kg/h of air at 5.12V assuming 0.55lb/hp*hr SFC, 12:1 AFR). I have no factory data on Cobra AFM, but according to Internet sources it's limited to 1500-1550 kg/h of aif, which is roughly equal to 500-520hp, somewhat less if you use richer AFRs.