Nistune Forums

I´m looking for an bullet proof head gasket for my CA18DET

It should handle about 35psi of boost

actually I use ARP Studs, E85, 26psi and an Cometic Head Gasket

=>at the moment it blows out a little bit into the cooling water....


There are some Gaskets from

Cometic

Tomei

Greddy

HKS

on the market

maybe as an alternative wellseal?!

You might need to o-ring the block, thats a shit load of boost..

see if Perma-seal do a 4 layer Gasket for it.

they aren't laser cut like the Cometic ones and can handle the heat and pressure better.

not to mention the claim they won't blow out!!