TTP max

[chris2712au]

my max limits are off the scale as in above 40ms in the higher pints of the map.. they are set to 255.. should the map rescale ? or is it normal.. cant remember it doing that on the previous versions..

[Matt]

If resizing the injectors should get set to 255. What do they look like with standard bin file?

[Zuikkis]

If resizing the injectors should get set to 255. What do they look like with standard bin file?

I think you should add some logic, if old value = 255 then new value = 255, otherwise rescale..

I often use low values in first two or three cells of TTPMAX, to prevent "MAF overshoot" when quickly releasing throttle. If TTPMAX=255, it can stall the engine when MAF momentarily shows too high values when there is air escaping backwards through.. With lower TTPMAX it works better.

But with >2000rpm there's no point to use anything else than 255..

[Matt]

First few values are actually lower to avoid this with the injector resize