This is just an update to let people whats going on. I've been going a lot of work on the 6303 and 7700 series boards in regards to PCB design, layout and ECU fit as well as firmware updates to fix consult streaming problems.
The good news is that the firmware updates are done and PCB design is just about finished. I have a number of prototype boards which are now being tested in my bench ECUs.
7700 board
- Confirmed working in S13 SR20 and S14 SR20. Firmware confirmed working on S13 KA24DE
TBD check the boards now work in S13 KA24DE and S14 KA24DE. Also to check S15 SR20, ER34 RB25, late Z32 VG30
6303 board
- Confirmed working in
R32 RB20
Z32 RB20
Maxima VG30 (consult version)
M30 VG30
- To be confirmed
R32 RB26 (dont have an ECU but can check firmware ok)
KA24E (consult version)
6802 board
- Confirmed working in
Maxima VG30 (non-consult) - tested ROM image in Z32 ecu. Need to reconfirm in maxima ECU
Z31 VG30 - tested ROM image in R31 ecu
R31 VG30
S13 CA18
Working rev2. to be retested rev3
Early Z31 VG30 (dual ROM ecu)
HR31 RB20
S12 CA18
My ADSL connection has died at home so I wont be able to repond to any emails until that is fixed (hopefully sometime this week)
matt
Update on things
Moderator: Matt