Page 1 of 1
maps/tables in use highlighting
Posted: Mon Jan 03, 2011 6:19 am
by nanook
Just tried this out to see the maps/tables in use highlighting
No change I can see in Ver 0.9.14.19
Is this happening Matt?
Re: maps/tables in use highlighting
Posted: Mon Jan 03, 2011 9:34 am
by Fordy
go into configuration and in the miscellaneous settings (bottom left) You should see the option - Map highlighting (testing)
Havent tried it on my car yet but i'm guessing you need to click it to enable it
Re: maps/tables in use highlighting
Posted: Mon Jan 03, 2011 10:24 am
by nanook
Ok thanks
I tried that, it has 2 obvious errors I can see
1) it highlights the knock fuel map when the main map is active ie: changes to main map only affect current afr's
2) no timing map is highlighted at all.
Re: maps/tables in use highlighting
Posted: Mon Jan 03, 2011 10:26 am
by nanook
Matt has the cel light coming on when switching to knock maps been implemented for hcr32?
Re: maps/tables in use highlighting
Posted: Mon Jan 03, 2011 4:08 pm
by Matt
Yes it has been implemented for all of them but I need feedback. Its been disabled by default on purpose so it doesnt confuse anyone yet
I cannot (easily) test knock on the bench. If some are backwards then I will need to check and reverse logic flags
Okay we will start with HCR32 so the knock fuel map is backwards and no timing map (you are using 04U12 yes?)
Re: maps/tables in use highlighting
Posted: Mon Jan 03, 2011 4:27 pm
by nanook
yep 04u12 hcr32
cool matt
so if ecu switches to knock maps light in dash should show?
Re: maps/tables in use highlighting
Posted: Mon Jan 03, 2011 11:26 pm
by Matt
It should look like the attached pics. My bench is behaving properly tonight HCR32 is not showing knock faults now until the sensor is disconnected. I'll do another upload tonight. Going to test several other ECUs firstly like SR20 to see what the map switching does on those
Re: maps/tables in use highlighting
Posted: Mon Jan 03, 2011 11:29 pm
by Matt
just noticed bug in the scales there also after posting that. fixing
Re: maps/tables in use highlighting
Posted: Tue Jan 04, 2011 6:47 pm
by nanook
Its working perfectly now as far as I can tell.
Great work Matt!