Nistune Forums

Posted: **Sun Jan 16, 2011 10:21 am**

Hi there,

I was wondering where do I actually disable the O2 feedback?
And is this done in real-time, or do I have to upload to the ECU (sync) b4 it is used by the ECU?

These are my standard flags .., strangely O2 is not flagged.
Does this mean my car ignores O2 at the current setup??

Posted: **Sun Jan 16, 2011 11:11 am**

I think I can answer my own question ...

DTC is just filtering out error codes it seems.

It looks that I have to set the o2 feedback temperature to some high value (max) to disable the Lambda feedback, right?

Posted: **Mon Jan 17, 2011 8:44 pm**

Thats correct. if it isn't inside the software then it either (a) doesnt exist or (b) I havent found it. Usually it probably doesn't exist because I have managed to work out the O2 feedback usage routines once I find the temperature check code

Nistune Forums

O2 (LAMBDA feedback disable ..? Where?

O2 (LAMBDA feedback disable ..? Where?

Re: O2 (LAMBDA feedback disable ..? Where?

Re: O2 (LAMBDA feedback disable ..? Where?