Nistune Forums

Everything was working fine for about a week, but now when I go to Display > Consult Gauges they just don't show up. After selecting it a new item "Consult Gauges View" does show up under the Windows menu and there is a checkmark next to it, but no gauges are displayed. The car is hooked up to consult and everything else works just fine.

Also, under Operations > Select Display Gauges, the only items are Knock count, TP (Load Index) and Injection duty cycle. I remembered seeing more options here.

So when you first connect to consult are you getting a 'Select consult registers' screen?

If not then see if that still exists under Operations - Select consult registers and see if they are ticked

Also let me know if the consult status indicator is moving indicating incoming data

Looks like this was fixed by going to Window > Cascade. Somehow I lost the windows when things were viewed/resized for a 22" screen. Just an FYI so it might help someone in the future.

Yeah sometimes if you resize the screen the gauges may disappear (or if theres a glitch where windows go elsewhere) so the Window cascade/tile can get them back